Kenmore D02 M90349, Use And Care Manual

Page: 12 / 36

CAUTION
If ignition does NOT occur in 5 seconds, turn the
burner controls OFF, wait 5 minutes and repeat the
lighting procedure. If the burner does not ignite with
the valve open, gas will continue to flow out of the
burner and could accidently ignite with risk of injury.
Turn controls and gas source OFF when not in use.
WARNING
Ignitor Lighting
▲
Do not lean over grill while lighting.
1. Turn OFF gas burner control valves.
2. Turn ON gas at source.
3. Open lid during lighting.
4.
To ignite, push and turn IGNITION BURNER knob
to HIGH .
5. Push and hold ELECTRONIC IGNITION button until
the burner lights.
6. If ignition does NOT occur in 5 seconds, turn the
burner controls OFF , wait 5 minutes and repeat the
lighting procedure.
7. To ignite remaining burners, turn knob to the HIGH
position starting with the burners closest to
IGNITION BURNER first. If ignitor does not work,
follow match lighting instructions.
8. For grills equipped with ELECTRONIC IGNITION
at each burner:
Repeat steps 4 through 6 to light each burner.
9. Once each burner has ignited, turn knobs to
desired setting.
Match-Lighting
▲
Do not lean over grill while lighting.
1. Open lid. Turn ON gas at source.
2. Place match into match holder (hanging from left
side panel of grill). Light match; then light burner
by placing match through the match light hole on
left side of grill.
3. Push in and turn far left burner knob to the HIGH
position. Be sure burner lights and stays lit.
4. Light adjacent burners in sequence by pushing
knobs in and turning to the
HIGH position.
SEAR Burner Ignitor Lighting
▲
Do not lean over grill while lighting.
1. Turn OFF gas burner control valves.
2. Turn ON gas at source.
3. Open lid during lighting.
4.
To ignite, push and turn SEAR burner knob to HIGH .
5. Push and hold ELECTRONIC IGNITION button until
the burner lights.
6. If ignition does NOT occur in 5 seconds, turn the
burner controls OFF , wait 5 minutes and repeat the
lighting procedure.
SEAR Burner Match-Lighting
▲
Do not lean over grill while lighting.
1. Open lid. Turn ON gas at source.
2. Place match into match holder (hanging from right
side panel of grill). Light match; then light burner
by placing match through the match light hole on
right side of grill.
3. Push in and turn SEAR burner knob to the HIGH
position. Be sure burner lights and stays lit.
NOTE: Your grill may NOT be equipped with a Side
burner!
Side burner Ignitor Lighting
▲
Do not lean over grill while lighting.
1. Open side burner lid. Turn ON gas at source.
2. Turn side burner knob to the HIGH position, push
and hold ELECTRONIC IGNITOR button.
3. If side burner does NOT light within 5 seconds, turn
knob to OFF , wait 5 minutes, then repeat lighting
procedure.
Side burner Match Lighting
1. Open side burner lid.
Turn
ON gas at source.
2. Place lit match near burner.
3. Turn side burner knob to the
HIGH position. Be sure
burner lights and stays lit.
12 • 466226313