background image

KENMORE VACUUM CLEANER WARRANTY

- 3 -

KENMORE LIMITED WARRANTY

FOR ONE YEAR from the date of sale this product is warranted against defects in 

material or workmanship.

WITH PROOF OF SALE a defective product will be replaced free of charge. 

The Kenmore brand is used under license. Direct all claims for warranty replacement to: 

Cleva North America, Inc., 1-877-531-7321

This warranty covers ONLY defects in material and workmanship, and will NOT pay 

for:

1.  Expendable items that can wear out from normal use, including but not limited to 

fi

lters, belts, bags or screw-in base light bulbs. 

2.  A service technician to clean or maintain this appliance, or to instruct the user in 

correct appliance installation, operation and maintenance. 

3.  Service calls to correct appliance installation not performed by Sears authorized 

service agents, or to repair problems with house fuses, circuit breakers, house wiring, 

and plumbing or gas supply systems resulting from such installation. 

4.  Damage to or failure of this appliance resulting from installation not performed by 

Sears authorized service agents, including installation that was not in accord with 

electrical, gas or plumbing codes. 

5.  Damage to or failure of this appliance, including discoloration or surface rust, if it is 

not correctly operated and maintained according to all supplied instructions. 

6.  Damage to or failure of this appliance, including discoloration or surface rust, 

resulting from accident, alteration, abuse, misuse or use for other than its intended 

purpose. 

7.  Damage to or failure of this appliance, including discoloration or surface rust, 

caused by the use of detergents, cleaners, chemicals or utensils other than those 

recommended in all instructions supplied with the product.

8.  Damage to or failure of parts or systems resulting from unauthorized modi

fi

cations 

made to this appliance. 

9.  Service to an appliance if the model and serial plate is missing, altered, or cannot 

easily be determined to have the appropriate certi

fi

cation logo. 

Disclaimer of implied warranties; limitation of remedies

Customer’s sole and exclusive remedy under this limited warranty shall be product 

replacement as provided herein. Implied warranties, including warranties of 

merchantability or 

fi

tness for a particular purpose, are limited to one year or the 

shortest period allowed by law. Seller shall not be liable for incidental or consequential 

damages. Some states and provinces do not allow the exclusion or limitation of 

incidental or consequential damages, or limitation on the duration of implied warranties 

of merchantability or 

fi

tness, so these exclusions or limitations may not apply to you. 

This warranty applies only while this appliance is used in the United States. 

This warranty gives you speci

fi

c legal rights, and you may also have other rights which 

vary from state to state. 

Cleva North America, Inc., Greenville SC 29607 

Summary of Contents for BC4026


























Reviews: