Kenmore BC3002, Use & Care Manual

Page: 19 / 48

- 19 -
4. Insert the new exhaust fi lter cartridge
into the fi lter cover with the rubber seal
upward.
5. To replace the exhaust fi lter cover,
insert the two tabs on the cover into
the slots at the top of the fi lter chamber.
6. Rotate fi lter cover down until it snaps into
place.
EXHAUST FILTER CHANGING
EXHAUST FILTER - HEPA MEDIA
The exhaust fi lter cartridge must be
replaced when dirty. Replace the fi lter
when the entire surface area is covered
evenly. The fi lter CANNOT be washed as
it will lose its dust trapping ability.
NOTE: See REPLACEMENT PARTS for part
number and purchase details (page 5).
WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust
fi lter or without the exhaust fi lter
installed. Do not operate without fi lter
cover installed.
1. Push latch up to release the exhaust fi lter
cover from slot in canister.
2. Pull fi lter cover down and outward to
remove it from fi lter chamber in the canister.
3. Remove the exhaust fi lter cartridge from
the fi lter cover.