Laundry Center Features
Cycle Selection
(continued)
Automatic Cycle
•
TOWELS -
This setting is best for towel
loads. Select the REGULAR--HIGH HEAT
temperature setting.
•
REGULAR
- This setting is best for cotton
items. Select the REGULAR--HIGH HEAT
temperature setting.
•
DELICATES/PERM PRESS
- This setting is
best for delicate, knit, or perm press items.
Select the PERM PRESS--MEDIUM HEAT
temperature setting for permanent press
items, the KNITS---MEDIUM-LOW
temperature setting for most knit items, or
the DELICATES--LOW HEAT temperature
setting for delicate items.
• Occasionally a load may seem too damp or
overdried at the end of the cycle. To
increase drying time for similar loads in the
future, set the cycle selector to the left of the
TOWELS, REGULAR, or DELICATES/PERM
PRESS setting. For loads requiring less drying
time, set the cycle selector to the right.
•
DAMP DRY -
This setting is best for items
you wish to partially dry before hanging or
ironing. Select the temperature setting most
suitable for the load.
Wrinkle Rid Cycle
If the dried load cannot be removed promptly
at the end of the cycle, the cycle selector will
automatically advance to the WRINKLE RID
setting when the Automatic Wrinke-Rid
option is set to
ON
. Unheated tumbling
continues for about 20 minutes to help
reduce wrinkling. If you do not wish to
advance into the Wrinkle Rid cycle from
Automatic cycle, set the Automatic Wrinkle-
Rid option to
OFF
. The Wrinkle Rid cycle
can also be selected as a separate cycle.
Air Fluff Cycle
This cycle provides approximately 20 minutes
of tumbling without heat. Use Air Fluff to dry
items containing feathers or down, foam
rubber, plastics, or similarly textured, rubber-
like materials, to freshen clothing, pillows or
blankets, or to dust draperies.
Timed Dry Cycle
This cycle provides up to 90 minutes of drying
time at the temperature selection of your
choice.
Energy Saving Tips
• Keep the lint screen clean and exhaust the
dryer correctly.
• Sort laundry properly and select proper
temperature and cycle settings. Choose the
Automatic Dry cycle whenever possible for
accurate drying time.
• Dry only full loads. Single items and small
loads usually take longer to dry.
• Avoid overloading, adding wet items to a
partially dry load, and overdrying.
• Dry one load after another to take
advantage of a warm dryer.
• Opening the door needlessly causes warm
air to escape, which prolongs drying time.
• If possible, use the dryer on low humidity
days.
• Install the dryer in an area where the room
temperature is at least 45°F (7°C).
P/N 137229400 (0906)
SAFETY LID
LOCK
FABRIC
SOFTENER
DISPENSER
SELF-CLEANING
LINT FILTER
BLEACH
DISPENSER
LINT
FILTER
OPENING
DRYING
RACK
DYNAMIC
BALANCE
SYSTEM
CONVENIENCE
HANGER
SAFETY
DOOR
SWITCH
MODEL-SERIAL
NUMBER PLATE
