background image

For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Record Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installation Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2

Kenmore Grill Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Use and Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Parts Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-31

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-34

Grill Information Center

466224411 • 3

Table of Contents

WARRANTY

KENMORE GRILL WARRANTY

All warranty coverage is void if this grill is ever used for 
commercial or rental purposes.

All warranty coverage applies only if this grill is used in 
Canada.

One Year Full Warranty on Kenmore Grill

If this grill fails due to a defect in material or workmanship 
within one year from the date of purchase, call 

1-800-241-

7548

 to arrange for free repair (or replacement if repair 

proves impossible).

Ten-Year Limited Warranty on Burners

For ten years from the date of purchase, any burner that 
rusts through will be replaced free of charge. After the first 
year from the date of purchase, you pay for labor if you wish 
to have it installed. 

All warranty coverage excludes ignitor batteries and grill part 
paint loss, discoloration or surface rusting, which are either 
expendable parts that can wear out from normal use within 
the warranty period, or are conditions that can be the result 
of normal use, accident or improper maintenance.

Toronto, ON., M5B 2C3

Sears Canada Inc.

• 

Read and follow all Safety, Assembly,  
and Use and Care Instructions in this 
Guide before assembling and cooking  
with this grill. 

• 

Failure to follow all instructions in this  
Use and Care Guide may lead to fire or 
explosion

which

 

could

 

result

 

in

 

property

 

damage

personal

 

injury

 

or

 

death

WARNING

This Grill is for Outdoor Use Only

Tools needed for assembly: 

Adjustable wrench (not provided) 
Screwdriver (not provided) 
7

/

16

Combination

 

wrench

 (

not

 

provided

Dual Fuel™ is a registered trademarks of 
the W. C. Bradley Company and used, 
with permission, by Sears Canada. All 
rights reserved.

CONVERSION READY

This grill easily converts from LP liquid 
propane to NG natural gas.
Contact your nearest retail store or 
www.sears.ca to purchase a natural gas 
conversion kit, part number 90105. 

Summary of Contents for 90113





































Reviews: