manualshive.com logo in svg

Kenmore 796.5197 Series, Use & Care Manual, Page: 8 / 33

Share
Download
Kenmore 796.5197 Series Use & Care Manual Download Page 8

8

KEY DIMENSIONS AND SPECIFICATIONS

CHOOSE THE PROPER LOCATION

FLOORING

CLEARANCES

WARNING

CAUTION

• Two or more people are required when moving, unpacking, and 

stacking the washer. Failure to follow this warning may result in 

damage to property or serious bodily harm.

• Store and install the washer where it will not be exposed to 

weather or to temperatures below freezing. Failure to follow this 

warning can cause serious injury, 

fi

 re, electric shock, or death.

• Properly ground the washer to conform with all electric 

governing codes and ordinances. Failure to follow this warning 

can cause serious injury, 

fi

 re, electric shock, or death.

• To reduce the risk of electric shock, do not install the washer in 

humid spaces. Failure to follow this warning can cause serious 

injury, 

fi

 re, electric shock, or death.

• To ensure proper air 

fl

 ow, do not block the large opening on the 

bottom of the washer with carpeting or other materials.

• Do not remove the ground prong. Do not use a 2-prong adapter 

or 2-wire extension cord. Failure to follow these warnings can 

cause serious injury, 

fi

 re, electric shock, or death.

NOTE:

 Installing the washer in a humid space, or installing or 

storing the washer where it will be exposed to the weather or 

freezing temperatures, may result in rust or other damage that is 

not covered by the product warranty.

• For best performance, plug the washer into its own individual 

outlet. If necessary, use a new, UL-listed 3-prong adapter or 

3-wire extension cord with a 3-prong (grounding) plug rated 

at no less than the branch circuit. Do not use an extension cord 

longer than three feet. Failure to follow these warnings can result 

in serious injury, 

fi

 re, electric shock, or death

• The outlet must be grounded in acco with current wiring electric 

codes and regulations.

• Time-delay fuse or circuit breaker is recommended.

NOTE: 

It is the personal responsibility and obligation of the 

product owner to have a proper outlet installed by a quali

fi

 ed 

service technician.

• This pedestal washer must be installed underneath a matching 

front-loading Kenmore model 796.* washing machine 

manufactured after 2009. (The 29” wide machine must be 

stacked under a 29” wide compatible Kenmore front-loading 

washer. The 27” wide machine must be stacked under a 27” 

wide compatible Kenmore front-loading washer.)

• The pedestal washer will not work as a standalone unit.

• The pedestal washer must be stacked under a compatible 

Kenmore appliance in order to operate properly.

Power Outlet

• The power outlet must be within 60 in. (1.5 m) of either 

side of the washer.

• The appliance and outlet must be positioned so that 

the plug is easily accessible.

•  To minimize noise and vibration, the washer MUST be 

installed on a solidly constructed 

fl

 oor.

•  Allowable slope under the entire washer is a maximum of 

1 inch. di

ff

 erence from side to side or from front to back.

•  Installing on carpeting and soft tile surfaces is not 

recommended.

•  Never install the washer on a platform or weakly 

supported structure.

NOTE: 

The washer must be installed on 

fi

 rm 

fl

 ooring to 

minimize vibration during the spin cycle. Concrete 

fl

 ooring 

is best, but a wood 

fl

 oor is su

ffi

  cient, provided it is built to 

FHA standards. The washer should not be installed on rugs 

or exposed to weather.

Description  

 

 

Top-Loading Compact Pedestal Washer

Electrical Requirements  

120 VAC @ 60 Hz.

Max. Water Pressure   

20~120 PSI (138~827 kPa)

Dimensions  

 

 

5197* 27” (W) x 30 3/4” (D) x 14 1/8”(H), 50 1/2”(D with drawer open)

 

 

 

 

5199* 29” (W) x 30 7/8” (D) x 14 1/8”(H), 50 9/16”(D with drawer open)

Net Weight    

 

5197* 100 lb (45.4kg), 5199* 105 lb (47.8kg)

Max. Spin Speed 

 

700 RPM

WARNING

1"

(2.5 cm)

1"

(2.5 cm)

65 

1

/

8

" (165.4 cm)

54 

1

/

4

" (137.8 cm)

27" (68.9 cm)

29" (73.7 cm)

INSTALLATION INSTRUCTIONS

To ensure su

ffi

  cient clearance for water lines and air

fl

 ow, allow 

minimum clearances of at least 1 in. (2.5 cm) at the sides and 

4 in. (10 cm) behind the unit. Be sure to allow for wall, door, or 

fl

 oor moldings that may increase the required clearances.

50 

1

/

2

" (128.3 cm)

52 

3

/

4

" (134 cm)

(20 in. [50.8 cm] additional needed for service)

29 

3

/

4

" (75.6 cm)

32" (82.1 cm)

Summary of Contents for 796.5197 Series


































Reviews:

No comments