Kenmore 796.4147 Series Use & Care Manual Download Page 8

Page: 8 / 33

INSTALLATION INSTRUCTIONS

UNPACKING AND REMOVING SHIPPING BOLTS

When removing the washer from the carton base, be sure

to remove the foam drum support in the middle of the

carton base. See drawing below.
If you must lay the washer down to remove the base

packaging materials, always protect the side of the

washer and lay it carefully on its side.

DO NOT

lay the

washer on its front or back.
To prevent internal damage during transport, the washer

is equipped with four shipping bolts and plastic retainers.

IMPORTANT:

• These shipping bolts and retainers

MUST NOT

removed until just before moving the washer into its

final position.

• These bolts and retainers

MUST

be removed before

operating the washer.

• Failure to remove shipping bolts and retainers may

cause severe vibration and noise, which can lead to

permanent damage to the washer.

NOTE:

The power cord is secured to the back of the

washer with a shipping bolt to help prevent operation

with shipping bolts in place.

Starting with the bottom two shipping bolts, use the

wrench (included) to fully loosen all four shipping

bolts by turning them counterclockwise.

Remove the bolt assemblies by wiggling them

slightly while pulling.

Locate the four hole caps included in the accessory

pack and install them in the shipping bolt holes.

NOTE:

Save the bolt assemblies for future use. To prevent

damage to internal components, DO NOT transport the

washer without reinstalling the shipping bolts.

Foam Tub

Support

Carton

Base

Power

Cord

Shipping

Bolts

Shipping Bolts

Hole Cap

Summary of Contents for 796.4147 Series


































Search results

Summary of Contents for 796.4147 Series

Reviews:

Related manuals for 796.4147 Series

Brands by name

Popular brands

Kenmore 796.4147 Series, Use & Care Manual

Search results

Summary of Contents for 796.4147 Series

Reviews:

Related manuals for 796.4147 Series

Brands by name

Popular brands