background image

25

CARE AND CLEANING

REGULAR CLEANING (continued)

Cleaning the Dispenser

  

The dispenser should be cleaned periodically to remove buildup of detergent and other laundry products that can 

cause the dispenser not to dispense the laundry product properly.

 

 Pull the dispenser drawer out until it stops.

      

Press down the lock tab located between the bleach

      and softener compartments and slide the drawer out.

      

Remove the liquid detergent box, softener and           

      bleach inserts from their compartments.

      

Clean the dispenser compartments and inserts with   

      warm soapy water.

1
2

3

4

5

6

7

8

9

Storing the Washer

If the washer will not be used for an extended period of time 

and is in an area that could be exposed to freezing 

 

temperatures, perform the following steps to protect the 

washer from damage.

      Turn OFF the water supply.

      

Disconnect hoses from water supply and drain water  

       from hoses.

      

 Plug the power cord into a properly grounded 

 

       electrical outlet.

       

Add 1 gallon of nontoxic recreational vehicle (RV)

       antifreeze to the empty wash drum and close the door.

       Press the POWER button, then press the SPIN SPEED      

       button without selecting a cycle. Press the START/PAUSE    

       button to activate the drain pump. This will expel some   

       of the antifreeze, leaving enough to protect the washer  

       from damage.

       

Unplug the power cord, dry the drum interior with a soft 

       cloth, and close the door.

       Refer to the instructions below to clean and dry the              

       dispenser drawer.

       

Store the washer in an upright position.

      

To remove the antifreeze from the washer after 

      storage, run the EXPRESS WASH cycle. Do not add  

       laundry to this cycle.

1

2

3

4

Summary of Contents for 796.4147 Series


































Reviews: