background image

4

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock, or injury to

persons when using this appliance, follow basic

precautions, including the following.

• Unplug the washer before cleaning

 to avoid the risk of 

electric shock.

• Never use harsh chemicals, abrasive cleaners, or 

solvents to clean the washer.

 They will damage  

the  finish.

• Do not put oily or greasy rags or clothing on top of  

the washer.

 These substances give off vapors that 

could ignite the materials.

• Do not wash items that are soiled with vegetable or 

cooking oil.

 These items may contain some oil after 

laundering and may catch fire.

• Disconnect this appliance from the power supply  

before attempting any user maintenance. Turning the 

controls to the OFF position does not disconnect this 

• 

Refer to INSTALLATION INSTRUCTIONS for detailed

 

grounding procedures.

 Installation instructions are  

packed in the washer for the installer’s reference. If the 

washer is moved to a new location, have it checked  

and reinstalled by a qualified service technician. Failure  

to follow this warning can cause serious injury, fire,  

electric shock, or death.

• 

Do not, under any circumstances, cut or remove the 

third (ground) prong from the power cord.

 Failure to 

follow this warning can cause serious injury, fire,  electric 

shock, or death.

• 

For personal safety, this appliance must be properly 

grounded. 

Failure to follow this warning can cause 

serious injury, fire, electric shock, or death.

• 

The power cord of this appliance is equipped with a  

3-prong (grounding) plug which mates with a  standard 

3-prong (grounding) wall outlet

 to minimize the possibility 

of electric shock hazard from this appliance.

• This washer must be plugged into a 120VAC, 60Hz 

grounded outlet. 

Failure to follow this warning can 

cause serious injury, fire, electric shock, or death.

• 

Have the wall outlet and circuit checked by a 

qualified electrician to make sure the outlet is properly 

grounded. 

Failure to follow this warning can cause 

serious injury, fire, electric shock, or death.

• Where a standard 2-prong wall outlet is encountered, 

it is your personal responsibility and obligation to 

have it replaced with a properly grounded 3-prong 

wall outlet. 

Failure to follow this warning can cause 

serious injury, fire, electric shock, or death.

• 

Do not install on carpet. Install the washer on a solid

 

floor.

 Failure to follow this warning can cause serious 

leak damage.

• 

Do not remove grounding prong. Do not use an 

 

adapter or extension cord. Plug into a grounded 

3-prong outlet.

  Failure to follow these warnings can 

cause serious injury, fire, electric shock, or death.

appliance from the power supply.

 Failure to follow this 

warning can cause serious injury, fire, electric shock,  

or death.

• Do not combine detergents, fabric softeners, and/or 

other laundry products from different manufacturers 

for use in a load, unless specified on the fabric label.

• Do not mix chlorine bleach with ammonia or acids 

such as vinegar. Follow package directions when 

using laundry products.

 Incorrect usage can produce  

poisonous gas, resulting in serious injury or death.

• Do not reach into the washer while parts are moving. 

Before loading, unloading, or adding items, push in the 

cycle selector knob and allow the drum to coast to a 

complete stop before reaching inside.

 Failure to follow 

this warning can cause serious injury, fire, electric shock 

or death.

• The washer should always be plugged into its own 

individual electrical outlet which has a voltage rating 

that matches the rating plate.

 This provides the best 

performance and also prevents overloading house  

wiring circuits which could cause a fire hazard from 

overheated wires.

• Never unplug your washer by pulling on the power  

cord. 

Always grip plug firmly and pull straight out  

from the outlet. Failure to follow this warning can 

cause serious injury, fire, electric shock, or death.

• Immediately repair or replace all power cords that 

have become frayed or otherwise damaged. Do not 

use a cord that shows cracks or abrasion damage 

along its length or at either end.

 Consult with a 

qualified service technician. Failure to follow this 

warning can cause serious injury, fire, electric shock,  

or death.

• When installing or moving the washer, be careful not 

to pinch, crush, or damage the power cord.

 Failure 

to follow this warning can cause serious injury, fire,  

electric shock, or death.

• The washer must be installed and electrically  

grounded by a qualified service technician in 

accordance with local codes

 to prevent shock hazard 

and assure stability during operation.

• The washer is heavy. Two or more people may be 

needed to install and move the appliance. 

Failure 

to do so can result in damage to property or serious 

bodily injury.

• Store and install the washer where it will not be 

exposed to temperatures below freezing or exposed  

to outdoor weather conditions.

 Failure to follow this 

warning can cause serious leak damage.

• To reduce the risk of electric shock, do not install 

the washer in humid spaces.

 Failure to follow this  

warning can cause serious injury, fire, electric shock, or 

death.

WARNING

WARNING

WARNING

WARNING

Summary of Contents for 796.4117

































Reviews: