background image

23

Door Seal and Glass Cleaning

 

Due to the location and nature of the door seal, some 

detergent and soil residue may build up on the door glass 

and seal. Periodic cleaning with a bleach solution can help 

remove buildup and stains, and can help sanitize the seal to 

prevent odors.

NOTE:

 Wear rubber gloves and eye protection while 

performing the following procedure:

       

 Dilute ¾ cup (177 ml) liquid chlorine bleach in 1      

        gallon (3.8 L) of warm/hot water.

  

       

Use this solution to wipe down 

        all surfaces of the gasket and 

        door glass to remove any 

        deposits. Be sure to fold back the 

        lip of the gasket to get under 

        the inner edge where residue  

        can build up.

       Dry

 the gasket and glass with a dry cloth.

       

To allow the gasket to dry completely, secure the   

       door slightly ajar with the door magnet. This will  

       promote air circulation and allow the interior of the  

       machine to dry. To use this feature, close the door  

       just until it contacts the door magnet.

NOTE:

• Follow the manufacturer’s instructions for proper use  

of bleach.

• To avoid damaging the gasket, NEVER use undiluted 

bleach to clean the gasket.

Removing Mineral Buildup

If you live in an area with hard water, mineral scale can form 

on internal components of the washer. Use of a water softener 

is recommended in areas with hard water.
Use a descaler, such as Washer Magic

®

, to remove visible 

mineral buildup. After descaling, always run the CLEAN

WASHER cycle before washing clothing. Do NOT use steel 

wool or abrasive cleaners.

Cleaning the Exterior

Proper care of your washer can extend its life. The outside of

the machine can be cleaned with warm water and a mild, 

nonabrasive household detergent.
Immediately wipe off any spills with a soft, damp cloth.

IMPORTANT:

 Do not use solvents, cleaning alcohols, or simi-

lar products. Never use steel wool or abrasive cleaners

because they can damage the surface.

Care and Cleaning of the Interior

Use a towel or soft cloth to wipe around the washer door

opening, door seal, and door glass. These areas should be

kept clean to ensure a watertight seal. Be sure to wipe 

under the inside rubber seal to remove any moisture or soil.
Always remove items from the washer as soon as the cycle 

is complete. Leaving damp items in the washer can cause

wrinkling, color transfer, and odor. Run the CLEAN WASHER 

cycle once a month, or more often if needed, to remove 

detergent buildup and other residue.

Clean Washer 

         

NOTE:

• Do not add tablet cleaner to the  dispenser drawer.

• Do not add any laundry detergent or fabric softener to 

the drawer when using CLEAN WASHER.

       

       Turn ON the washer and press and hold the  

       EXTRA RINSE button for five seconds, and the LED             

       will blink. Selecting any other cycle after Clean Washer  

       has been selected will cancel the Clean Washer cycle. 

       After the cycle ends, open the door and allow the   

      drum interior to dry completely.

NOTE:

 Run the Clean Washer cycle once a month. If a  

mildewy or musty smell is present, run the Clean 

Washer cycle once a week for three consecutive weeks. 

1
2

3

4

1

2

3
4

CARE AND CLEANING

REGULAR CLEANING

WARNING:

         

To reduce the risk of fire, electric shock, or injury to persons, read and follow this

   entire Use & Care Guide, including the Important Safety Instructions, before operating this washer. 
• Unplug the washer before cleaning to avoid the risk of electric shock.

 Failure to follow this warning can     

  cause serious injury, fire, electric shock, or death.

• Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer.

 They will damage the finish.

5

Remove any clothing in the drum.

 

Open the dispenser drawer.
Add liquid chlorine bleach or another drum cleaner 

designed specifically for cleaning front load  

washers.

    

- If using liquid chlorine bleach

      Add liquid chlorine bleach to the bleach 

      compartment of the drawer. (NOTE : Do not    

      exceed the maximum fill line and do not pour    

      undiluted liquid bleach directly into the wash  

      drum.)

   

-  If using powder cleaner

      Remove the liquid detergent cup and add powder  

      cleaner to the main wash compartment of the 

      dispenser drawer.

   

-  If using tablet cleaner

      Add tablet cleaner directly to the wash drum.

Summary of Contents for 796.4117

































Reviews: