- 12 -
With a flat head screwdriver, carefully pry off and
remove the cover over the screw holes on the left side
of refrigerator housing.
Fig. 45
Remove the outer screw from cabinet at area
between freezer and refrigerator doors.
(You will need this hole for the Middle Hinge Bracket).
Fig. 46
Place screw into outer hole on right side of cabinet.
Attach cover on the right side. Cover is force-filted.
Screw
Fig. 47
Flip the middle hinge bracket (flange now will be on
top) and position on left side of refrigerator and
re-attach with two bolts and phillips screw.
Pull the wire harness out from the base as shown
below.
Fig. 49
Insert the water tube and wire harness trough the bottom
hinge pin and insert the pin into the bottom of the door.
Note: Reinstall the Bottom Nut.
Fig. 50
Place washer between refrigerator door and middle hinge
and reattach hinge pin to hinge bracket with
¼
in socket
wrench.
With the refrigerator door fully opened reconnect tube
and connectors as described in Replace Refrigerator
Door.
Put freezer door down over the Hinge Pin on the middle
hinge pin bracket.
Place Top Hinge pin in the top of freezer door and line
up the Top Hinge with holes in top of refrigerator.
Use the 3 bolts to replace the hinge.
Fig. 53
Tighten Bolts. Force-fit Top Hinge Cover over top Hinge.
Fig. 54
