12
HOW TO REPLACE FREEZER DOOR HANDLES
NOTE:
Handle appearance may vary from the illustrations
on this page.
Replacing Freezer Drawer Handles
Place the handle on the door by
fi
tting the handle
footprints over the mounting fasteners and tightening the
set screws with a
⅛
in. Allen wrench.
NOTE:
If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
REFRIGERATOR INSTALLATION
HOW TO REMOVE FREEZER DOOR HANDLES
NOTE:
Handle appearance may vary from the illustrations
on this page.
Removing Freezer Drawer Handles
Loosen the set screws located on the lower side of
the handle with a
⅛
in. Allen wrench and remove the
handle.
NOTE:
If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
NOTE:
Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow
opening. If it is necessary to remove the handles, follow the directions below.
When assembling or disassembling the handles:
Grasp the handle
fi
rmly to ensure it will not drop or
•
cause injury.
Prevent the handle from swinging toward nearby
•
people or animals.
Insert the bracket hole of the handle into the stopper
•
bolt of the door exactly, then assemble the set screws
to
fi
x the handle in place.
Check for any gap between the door and handle after
•
the handle is
fi
xed in place.
WARNING
