manualshive.com logo in svg

Kenmore 795.6827 Series, Service Manual

Share
Download
Kenmore 795.6827 Series Service Manual Download Page 17

- 17 -

screwdriver and remove.

Fig. 66

Using 10mm or 13/32-inch socket wrench, remove
the 3 bolts and lift off the Top Hinge. Set parts aside.

Fig. 67

Hinge Pin

Before removing the doors, remove the Base Grille.

3-8-1 REMOVE SWING REFRIGERATOR
         AND FREEZER DOORS

Lift up door slightly and remove it. Place door on
 a non scratching surface.

Fig. 68

Remove washer and set aside.

Using a 1/4 socket wrench, loosen and remove 
Hinge Pin from the Middle Hinge Bracket.

Carefully lift up the freezer door. Remove and place 
it on a non-scratching surface.

Using a 13/32” 10mm socket wrench with a 
2” extension, loosen the 2 bolts and remove 
Bottom Hinge Bracket from right side.

Bottom Hinge
Bracket

Bottom Hinge Pin

Fig. 70

Fig. 21

Middle Hinge 
Bracket

 

Middle 

Bolts

 

Screws 

Fig. 69

Washer

 

Hinge Pin

 

(2) 

Use a 10mm or 13/32 inch socket wrench to remove 
the 2 bolts in Middle Hinge Bracket. Remove 
screws. Set Middle Hinge Bracket and other parts 
aside.

3-8 DOOR DISASSEMBLY 
      FOR SWING TYPE MODELS 

Summary of Contents for 795.6827 Series



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands