Kenmore 795.6827 Series, Service Manual

Page: 13 / 66

- 13 -
With a flat-head screwdriver, carefully pry off and
remove the cover over the screw holes on the left side
of refrigerator housing.
Fig.37
Remove Washer and set aside.
Using a 1/4 socket wrench, loosen and remove
Hinge Pin from the Middle Hinge Bracket.
Fig. 21
Middle Hinge
Bracket
Middle
Bolts
Screws
(2)
Fig. 36
Washer
Hinge Pin
Use a 10mm or 13/32 inch socket wrench to remove
the 2 bolts in Middle Hinge Bracket. Remove 2
screws. Set Middle Hinge Bracket and other parts
aside.
You will need these holes for the Middle Hinge Bracket.
Remove the 2 outer screws from cabinet frame as
Fig. 38
Fig. 39
Flip the middle hinge bracket and position on
left side of refrigerator and re-attach with
two bolts and a 2 phillips screws.
Fig. 40
Place screws into outer holes on right side of cabinet.
Attach cover on the right side. Cover is force-fitted.
shown.
Middle
Hinge Pin
Washer
Line up Top Hinge with holes in top of
refrigerator. Use the 3 bolts to replace the Hinge.
Fig. 18
Fig. 42
Top Hinge Pin
Tighten Bolts. Force-fit Top Hinge Cover over top
Hinge.
Fig. 43
Put refrigerator door down over the Hinge
Pin on the Middle Hinge Pin Bracket.
Fig. 41
Attach Middle Hinge Pin and r . eplace washer