Kenmore 790. 4790 SERIES, Use & Care Manual

Page: 12 / 36

12
Consumer Defined Control Features
Setting Temperature Display — Fahrenheit or Celsius
The BROIL
Broil
and FLEX CLEAN
Flex
Clean
pads control the Fahrenheit or Celsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit. Note: both ovens will be changed at the same time.
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. Press
Broil
and hold for 6 seconds. A beep will sound, " 550 "
will appear "UPPER" and "BROIL" will flash in the display
(Figure 1). After 6 seconds a beep will be heard and " F " (Figure
2) or " C " (Figure 3) will appear in the display.
If " F " appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If " C " appears, the display is set to show temperatures
in Celsius (Figure 3).
2. Press
Flex
Clean
to switch between Fahrenheit or Celsius display
modes. The display will show either " F " (Figure 2) or " C "
(Figure 3).
3. Press
START
to accept the change or press
STOP
to reject the
change.
INSTRUCTIONS PRESS DISPLAY
Broil
for 7seconds
Flex
Clean
START
or
STOP
Figure 1
Figure 2
Figure 3
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED