38
Care and Cleaning
Removing and Replacing the Oven Door
The door is heavy. For safe, temporary storage,
lay the door flat with the inside of the door facing down.
To remove the oven door:
1.
Open oven door completely, horizontal with floor (
2. Pull the door hinge locks on both left and right door hinges
down from the oven frame completely toward the oven
door (
). A tool such as a small flat-blade
screwdriver may be required.
3. Firmly grasp both sides of oven door along the door sides.
Do not use the oven door handle (
4. Close the door to 10 degrees from the door frame (
).
5. Lift the oven door hinge arms over the roller pins located on
each side of the oven frame (
To replace oven door:
1.
Firmly grasp both sides of oven door along the door sides.
Do not use the oven door handle (
2. Holding the oven door at the same angle as the removal
position (
), seat the hook of the hinge arm
over the roller pins located on each side of the oven door
frame (
). The hook of the hinge arms must be
fully seated onto the roller pins.
3. Fully open the oven door, horizontal with floor (
4. Push the door hinge locks up toward and into the oven
frame on both left and right oven door hinges to the locked
position (
).
5. Close the oven door.
Important:
Special Door Care Instructions - Most oven doors contain glass
that can break. Do not close the oven door until all the oven
racks are fully in place. Do not hit the glass with pots, pans, or
any other object. Scratching, hitting, jarring, or stressing the
glass may weaken its structure causing an increased risk of
breakage at a later time.
Removing and Replacing the Warmer Drawer
Figure 44: Door hinge location
Figure 45: Door hinge locks
Figure 46: Holding door for removal
Figure 47: Location of hinge arm and roller pin
Oven door
hinge
locations
LOCK
about
10°
hinge
oven
door
roller
pin
hinge
arm
Summary of Contents for 790.4260 Series
Page 43: ...2500 10 ...
Page 44: ......
