background image

19

Oven Controls

Warm & Hold™

Warm & Hold will keep cooked foods warm and ready for 
serving for up to three hours after cooking has finished. After 
three hours the Warm & Hold will shut off automatically. 

Warm & Hold should only be used with foods that are already 
at serving temperatures. Warm & Hold will maintain the oven 
temperature at 170 ° F (77 °C).

To set Warm & Hold:

If needed, arrange oven racks and place cooked food in 
oven.

Press Warm & Hold. HLd will appear in the display. The 
oven control will beep when Warm & Hold is accepted. 

To turn Warm & Hold off at any time press 

.

To set Warm & Hold to start after a Timed Bake automatically:

1.

Press Bake. Press 

or 

to set temperature and 

release the arrow key for the oven to accept the set temper-
ature.

2. Press Cook Time. 

3. Press or

 to set time. Release arrow key when 

desired cook time appears in the display.

4. Press Warm & Hold. The oven control will beep when 

Warm & Hold is accepted.

5. Warm & Hold is set to turn on automatically after the 

Timed Bake or Delay Timed Bake has finished. The Warm & 
Hold indicator light will glow indicating that the Warm & 
Hold feature is set to start when the timed bake is finished.

Adjusting Oven Temperature

Your appliance has been factory calibrated and tested to ensure 
an accurate baking temperature. For the first few uses, follow 
your recipe times and temperature recommendations carefully. 
If you think the oven is cooking too hot or too cool for your rec-
ipe times, you may adjust the User Programmable Offset (UPO) 
so the oven cooks hotter or cooler than the oven temperature 
displayed.

The oven temperature may be increased as much as +35 °F 
(+19 °C) or decreased -35 °F (-19 °C) from the factory cali-
brated settings.

To adjust oven temperature:

1.

Press Bake. 

2. Hold the 

 arrow until 5 5 0 appears. 

3. Press and hold Bake until 0 appears. 

4. Use the 

 or 

 arrow keys to adjust the tempera-

ture.

5. If the STOP key is pressed during the programming mode, 

the UPO value will remain unchanged.

Important notes:

Making oven temperature adjustments will not change the 
Broil or Self-Clean operating temperatures.

Do not use oven thermometers such as those found in 
grocery stores to check the temperature settings inside your 
oven. These oven thermometers may vary as much as 20 °F 
to 40 °F from actual temperatures.

The oven temperature adjustment may be made if your 
oven control is set to display 

º

C temperatures. Minimum and 

maximum settings for 

º

C is plus or minus (±) 19 °C. 

If the display mode is set for 

º

C, adjustments made will be 

in 1 °C increments on each press of 

 or 

STOP

STOP

Summary of Contents for 790.4250 Series

































Reviews: