![Kenmore 790. 4043 Use & Care Manual Download Page 7](http://html.mh-extra.com/html/kenmore/790-4043/790-4043_use-and-care-manual_184903007.webp)
ENGLISH
7
STOP
Clear
Select
Broil
Timer
Set/Off
Bake
Oven Control Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
Select BROIL PAD
—
Used to select the
variable broil function.
UP and DOWN ARROW
PADS
— Used along with
the function pads to select
oven temperature, time of
day and minute timer.
BAKE PAD
—Used to
select the bake
function.
CLOCK SET PAD
— Used
to set the time of day.
STOP/CLEAR
— Used to clear any function
previously entered except the time of day
and minute timer. Push
STOP/CLEAR
to
stop cooking.
TIMER SET/OFF PAD
— Used to
set or cancel the minute timer. The
minute timer does not start or stop
cooking.
Note:
The graphics on your timer may not look exactly like those shown. This doesn't change the way it operates.
Setting Oven Controls
Note:
The time of day must first be set in order to operate the oven.
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".
1.
Press
.
2.
Within 5 seconds, press and hold the
or
until the correct time of day appears in the display.
Changing the Temperature Display Mode
The electronic oven control temperature display mode was factory preset to display (Fahrenheit) °F oven temperatures. Note:
Oven cooking temperatures may be set from 170°F to 500°F (76°C to 260°C).
To change the Temperature Display Mode to °C (Celsius) or from °C to °F
(do not use Bake or Broil while changing the
Temperature Display Mode)
:
1.
Press & hold the
Select
Broil
key pad for 6-8 seconds until
F
or
C
appears in the display.
Note:
At this time the display will show
the current Temperature Display Mode whether set for
F
or
C
.
2.
Press the
key pad once to choose the (Fahrenheit) °F mode; or press the
key pad once to choose the (Celsius)
°C mode.
3.
After 5 seconds, the display will flash. To accept the change, wait 5 more seconds until the oven control beeps once.
To complete the change skip step 4 below,
OR
;
4.
If at any time during the process of changing the Temperature Display Mode
(
F
or
C
) you decide the change is not desired,
press the
STOP
Clear
key pad before the oven control beeps once to
cancel
the process.
5.
The display will then return to the time of day with any temperature display mode change you may have requested.