background image

9

Setting Oven Controls

Note:

 The time of day 

must

 first be set in order to operate the oven.

To Set the Clock

When the range is first plugged in, or when the power supply to the range has been interrupted, the display will 
flash "12:00".

1.  Press 

 

once (do not hold pad down).

2.  Within 5 seconds, press and hold the 

 or 

 

until the correct time of day appears in the display.

 Note:

 The clock cannot be changed during any timed bake or Self-Clean cycle.

To Set the Minute Timer:

1.  Press 

Timer On/Off

.

2.  Press the 

 to increase the time in one minute increments. Press and hold the 

to increase the time in 10 

minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.

 

Note:

 If the 

 pad is pressed first, the timer will advance to 11 hours and 59 minutes.

3.  The display shows the timer countdown in minutes until 1 minute remains. Then the display will countdown in 

seconds.

4.  When the set time has run out, the timer will beep 3 times. it will then continue to beep 3 times every 60 

seconds until 

Timer On/Off 

is pressed.

Note: 

The indicator light located above the 

Timer On/Off

 

pad will glow while the minute timer is active.

Note:

 The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep 

when the set time has run out. The minute timer can be used alone or during any of the other oven functions. 
When the minute timer is in use with any other function, the minute timer will be shown in the display. To view 
other functions, press the pad for that function.

To Change the Minute Timer while it is in use:

While the timer is active and shows in the display, press and hold the 

 or 

 to increase or decrease the time.

To Cancel the Minute Timer before the set time has run out:

 Press 

Timer On/Off

.

Note:

 To turn the 

time of day

 display 

OFF

 or 

ON

 in the display press 

 and hold for 8 seconds (the control 

will beep once) and then release. This feature does not remove the set time of day from the memory of the 

control. When the display is turned OFF the time of day will re-appear for a few seconds any time the 

 pad 

is touched.

Summary of Contents for 790.4030 SERIES
























Reviews: