9
Oven Controls
Changing the Temperature Display Mode (F or C)
The electronic oven control is set to display Fahrenheit (F) when
shipped from the factory. The display may be changed to show
either Fahrenheit or Celsius (C) oven temperatures.
To change temperature display mode:
1.
Press and hold Broil for 6-8 seconds until F or C appears in
the display. At this time the display will show the current
temperature display mode whether set for F or C.
2. Press either
or
to toggle between F or C.
3. To accept the change, wait until the oven control provides
the acceptance beep.
4. The display will return to the time of day with the tempera-
ture display mode changed the next time the oven is set for
Bake or Broil.
Important:
If at any time during the process of changing the temperature
display mode you decide not to change the mode, press
once before the acceptance beep. The temperature display
mode cannot be changed when Bake or Broil is active.
Oven Light
The interior oven light (some models) will automatically turn on
when the oven door is opened. Press the rocker switch marked
OVEN LIGHT on the left side of the control panel to turn the
oven light on and off whenever the oven door is closed.
When baking leave oven light off.
The interior oven lights are located in the upper rear corners of
the oven interior.
See “Replacing the Oven Lights”
on
page 14
for more information.
Setting the Timer
The timer allows you to track cooking times without interfering
with the cooking process. The timer may be set from 1 minute up
to 11 hours and 59 minutes.
Important: The Timer will not start or stop the cooking process. It
serves as an extra timer in the kitchen that will beep when the
set time has run out. The minute timer can be used alone or
when Bake or Broil is active. If another feature is active when
the timer is running, the minute timer will show in the display.
To set the timer:
1.
Press Timer Set/Off.
2. Press
to increase the time in one minute increments.
Press and hold
to increase the time in 10 minute incre-
ments. The timer can be set for any amount of time from 1
minute to 11 hours and 59 minutes.
Note: If
is pressed first, the timer will advance to 11
hours and 59 minutes.
3. When the set time has run out, the timer will sound a 3
second tone. 0:00 will show in the display until Timer
Set/Off is pressed.
To change the time remaining on the Timer:
While the timer is active, press and hold
or
to
increase or decrease the time remaining.
To cancel the timer press Timer Set/Off once.
Figure 3: Oven light switch
STOP
STOP