Kenmore 790.3690 Series, Use & Care Manual

Page: 13 / 80

english
13
setting Oven Controls
for 7 seconds
insTRUCTiOns PRess DisPlAY
or
The
ClOCK
pad is used to set the clock. The clock may be set for 12 or 24 hour time
of day operation. The clock has been preset at the factory for the 12 hour operation. When
the range is first plugged in, or when the power supply to the range has been interrupted,
the timer in the display will flash.
Figure 1
Figure 2
Figure 3
Figure 5
Figure 6
Figure 4
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
To set the clock (example below for 1:30)
1. Press . “ ClO” will appear in the display (Figure 2).
2. Press pads to set the time of day to 1:30 (Figure
3). “ ClO” will stay in the display. Press . “ ClO” will
disappear and the clock will start (Figure 4).
Changing between 12 or 24 hour time of day display
1. Press and hold for 7 seconds. “ ClO” will appear in the
display. “ 12h” (Figure 5) or “24h” (Figure 6) appears in the
display and the control beeps once.
2. Press to switch between the 12 and 24 hour time of day
display. The display will show either “
12h” (Figure 5) or “24h”
(Figure 6).
3. Press to accept the change or press to reject the
change.
4. Reset the correct time as described in
To set the Clock above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.