Kenmore 6120 Series, Use & Care Manual

Page: 14 / 60

Different models have different ice maker that can be
installed, so please check whether the ice maker you
bought matches your refrigerator.
Please install the electronic ice maker for this model.
When a mechanical ice maker is installed, it does not
work.
Code IM Model & Kit Number
Type Ice Maker Model Refrigerator Model Code IM Model
111.7121#
111.6121#
111.6120#
111.6126#
60140-0010100-00 Electronic
IME1821
After installing the water line, plug in the refrigerator.
After plugging in the refrigerator, the ice maker will start
automatically, with the LED light on. (If the LED light is
off, press the button once for 1 second).
Please keep the refrigerator turned on to allow the
icemaker to reset. This will take approximately
5 minutes. The icemaker will begin to operate
automatically once the freezer compartment
temperature reaches 15°F (-9°C) or below.
127(
This icemaker is equipped with a water level sensor.
If low water pressure condition exists, the icemaker
water valve may be turned on up to 7 times in order
to deliver enough water to the icemaker. Allow
24 hours to produce the first batch of ice. Discard
the first three batches of ice produced. Allow 3 days
to completely fill the ice container.