9
ENGLISH
SWITCH OPERATION
Power and Brush Roll
The Power on/off button is located on
the top of vacuum body.
Turn on vacuum by power button after
plugging cord into electrical outlet.
The Brush Roll On/Off button turns the
rotating brush roll on and off.
Turn brush roll on to clean carpet and
rugs.
Turn brush roll off to clean hard surface
floors.
The brush roll will automatically turn
off when the handle is in the upright
position.
Note
: For optimal cleaning
performance, adjust to the lowest
practical setting. If your cleaner is
difficult to push, adjust to the next
higher setting.
Power
On/Off
Dust Bin
Release
Wand
Release
Brush Roll
On/Off
Circuit breaker
(Reset switch)
The circuit breaker turns off the brush-
roll if its motion becomes obstructed.
The brushroll will stop, but the suction
motor will continue to run.
To reset the breaker, turn cleaner off
and unplug it. Clear the obstruction from
brushroll area.
Use pen tip to press down reset switch.
Turn cleaner on and continue cleaning.
FLOOR/CARPET CLEANING
HEIGHT ADJUST KNOB
1. Place handle in upright position
2. Turn height adjustment knob to
desired setting
Lowest setting – For bare floors
4-step carpet setting – For various
carpet heights
Low carpet setting
– For short pile carpets
Intermediate carpet settings
– For medium pile carpets
High carpet setting
– For plush pile carpets
