![background image](http://html.mh-extra.com/html/kenmore/405-35182510/405-35182510_use-and-care-manual_183990005.webp)
Fig.10
Fig.11
Press the lower center button to Start and Stop fan and to
select Low, Medium or High fan speed. Press the middle center
button to select 1, 2 or 4 hour automatic shutoff time period
of operation.
NOTE: There is no Mode key on the control panel. Mode function
must be activated from the remote control.
II. Control Panel (Fig.10)
III. Vertical Air Direction
To adjust angle of vertical air direction, grasp the sides of the
guard assembly and lightly push it either up or down.
IV. Fan height adjustment
Loosen the Height adjustment ring at the top of the extension
pole. Raise or lower the internal metal pole to the desired
height and securely tighten the Height adjustment ring.
“ ” MODE KEY
Press this key to change speed from Normal to Natural mode. In Natural mode, the
fan speed cycles from top speed to slower speed in each fan speed setting. When
in Natural mode, the fan speed indicator on the control panel will flash on and off.
Press this key again to resume Normal speed. In Normal mode the fan speed will
not cycle and fan speed indicator will light steadily.
1. Press down on the battery compartment cover
and slide it out.
2. Insert the AAA batteries, making sure that the
positive
terminals are facing the proper way.
3. Replace the cover.
BATTERY INSTALLATION
(batteries not supplied with product)
4
V. Oscillation Control Button
Push down the oscillation control button on the top of the
motor unit to start fan oscillation from side to side. Raise
oscillation control button back up to stop oscillation motion. Fig.11.
VI. Remote Control Holder
When not in use, store the Remote Control in its Holder.
The Holder clips onto the internal metal pole of the stand.
L ow
Med
Timer
High
4Hr
2Hr
1 Hr On/Of
f
Speed
AAA Battery
Oscillation Control Button