2
PART FIGURE (rear view)
1. Rear guard
2. Front guard
3. Blade Set
4. Speed Switch
5. Knobs-Vertical airflow angle adjustment
6. Base
IMPORTANT
：
Install the knobs (Obtain from the UCG bag)
on both sides of the fan body as shown
in Fig.1.
OPERATING INSTRUCTIONS
1. Turn switch (A) to desired fan speed:
Off, High, Med, Low. (Fig.2)
2. To adjust vertical airflow angle,
loosen the knobs (B) on the sides
of the fan. Tilt fan body (C)
to the desired angle and
retighten the knobs. (Fig.3)
1
2
6
3
5
5
4
Low
Med
High
Of
f
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to
qualified service personnel if service is needed,or call Customer Assistance at
866-646-4332.
1. Before cleaning fan, always unplug it from the electrical outlet.
2. To ensure adequate air circulation to the motor, use a vacuum to keep vents
at the rear of the motor housing free from dust, fluff, etc. Do not disassemble
fan to remove dust or fluff.
CAUTION: To avoid injury from electrical shock, unplug the fan before using a
vacuum cleaner to clean the vents.
3. Wipe the exterior parts with a soft cloth soaking a mild detergent.
Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use gasoline or paint thinner as a cleaner.
4. Do not allow water or any other liquid into the motor housing or interior parts.
MAINTENANCE INSTRUCTIONS
Fig.1
Fig.2
Fig.3
