134
5,25
in.
in the window
pane
in the wall: you are
recommended to
insulate the sec-
tion of wall using
suitable insulation.
in the wood-
en kickboard
of a French
window
F
Pre p a r i n g f o r u s e
MAX100 cm
MAX 39 inches
MIN 35 cm
MIN 14 inches
SEMI-PERMANENT INSTALLATION
If required, your appliance can also be
installed semi-permanently (Fig.
E
).
Proceed as follows:
•
Drill a hole (ø 134 mm) in an outside wall or
through a window pane.
Respect the dimensions and height of the
hole given in figure
F
and
G
.
•
Fit the wall flange
into the hole.
•
Fit the air exhaust hose
in the relevant
hose located on the rear side of the appli-
ance. (fig.
A
page 5).
•
Fit the end of the hose
to the wall
flange
as shown in fig.
G
.
10
11
11
10
G
NOTE:
When installing the air conditioner
semi-permanently, you should leave a door
slightly open (as little as 1 cm) to guarantee
correct ventilation.
6
30 cm
11,8 inches
30 cm
11,8 inches
E
Keep the air hoses as short and free of
curves as possible to avoid constrictions.
