
7
ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS
Only certain cooktop models may be installed
over certain built-in electric oven models.
Approved cooktops and built-in ovens are listed
by the MFG ID number and product code (see the
insert sheet included in the literature package and
cooktop installation instructions for dimensions).
36
"
Min.
(91.4 cm) Min.
Use ¾
"
(1.9 cm) plywood,
installed on two runners,
fl
ush with toe plate.
Base must be capable of
supporting 150 pounds
(68kg) for 27
"
models and
200 pounds (90kg) for
30" models.
Cut an opening in wood base minimum 4
"
x 4
"
(10.2 cm X 10.2 cm), 2” (5 cm) from left side
fi
ller panel, to route armored cable to junction
box.
* If no cooktop is installed
directly over the oven unit,
5
"
(12.7cm) maximum is
allowed above the
fl
oor.
208/240 Volt junction
box for built-in oven.
Figure 12 - TYPICAL UNDER COUNTER INSTALLATION OF A SINGLE ELECTRIC BUILT-IN OVEN
WITH AN ELECTRIC COOKTOP MOUNTED ABOVE
Approx. 3
"
(7.5 cm)
Cabinet side
fi
ller panels
are necessary to isolate
the unit from adjoining
cabinets. Cabinet side
fi
ller height should
allow for installation
of approved cooktop
models
4½
"
(11.5
cm) Max.*
For typical under counter installation of an electric built-in oven see Figure below.
Note 1
: 4
"
x 4
"
(10.2 cm X 10.2 cm) opening to route
armored cable from cooktop to junction box.
Approx. 3
"
(7.5 cm)
Unit will
overlap cutout
(minimum)
edges by 1
"
(2.5 cm)
See
Note 1
208/240Volt
junction box
for cooktop
CUTOUT DIMENSIONS
F. WIDTH
G. DEPTH
H. HEIGHT
27
"
(68.6cm)
Wall Oven
24
7
/
8
"
(63.2cm) Min.
25¼
"
(64.1cm) Max.
23½
"
(59.7cm) Min.
27¼
"
(69.2cm) Min.
28¼
"
(71.8cm) Max.
30
"
(76.2cm)
Wall Oven
28½
"
(72.4cm) Min.
29
"
(73.7cm) Max.
23½
"
(59.7cm) Min.
27¼
"
(69.2cm) Min.
28¼
"
(71.8cm) Max.
To reduce the risk of
personal injury and
tipping of the wall
oven, the wall oven
must be secured to the
cabinet(s) by mounting
brackets.