8
Setting Surface Controls
(cont’d)
Using the Touch Control
Be sure that your finger is placed in the center of the touch pad. If the finger is not placed
on the center of a pad, the cooktop may not respond to the selection made.
Lightly contact the pad with the flat part of your entire fingertip. Do not just use the narrow
end of your fingertip.
LED Messages or Light Indicators Displayed by Main Control
CONTROLS LOCK
- This feature allows the cooktop to be locked when no cooking zones
are active. If the cooktop is in use, it will not be possible to lock the controls. Touch and hold
the LOCK key pad for few seconds. A beep will sound and the Lock indicator light will glow
(Fig. 2). Once locked no Cooking Zones will activate. To turn the Controls Lock OFF, touch
and hold the LOCK key pad for few seconds. A beep will sound, the Lock indicator light will
turn OFF (Fig. 1) and the cooktop may be used normally.
COOKTOP POWER
- The Cooktop POWER key pad activates the entire Cooktop. To power
the cooktop, touch and hold the POWER key pad. A beep will sound and the Power LED will
glow (See Fig. 4). The cooktop will be in a ready mode. If no other key pads are touched the
Cooktop Main POWER will turn OFF automatically. To turn the Main Power OFF touch and
hold the Main POWER key pad. A beep will sound and the Power Indicator Light will turn
OFF (See Fig. 3).
ERROR CODES E0 XX
- The element power level displays can show error codes. When
this happen, two displays are used to show the error code in format “E0” “XX” where XX
indicates the error code (Figs. 5 & 6). If this happen, please refer to section “Before you call”
in this manual.
Fig. 1
Fig. 2
Fig. 5
Fig. 6
Fig. 3
Fig. 4
LED Messages or Light Indicators Displayed by Cooking Element Controls
COOKING ZONE ON/OFF PAD
- Each Cooking Element has separate ON/OFF key pads. Once the Main Power key pad
has been touched to activate the cooktop, touch the corresponding Cooking Element ON/OFF key pad once to active the
Cooking Zone needed.
“
- -
”
will appear in the LED display. If the corresponding (increase) /
(decrease) key pad is
not touched, the request to turn the Cooking Element ON will cancel and the Cooktop Main Power will turn OFF. To set a
Cooking Element power level touch the corresponding Cooking Element (increase) or (decrease) key pad once. To turn
OFF a Cooking Element, touch the Cooking Element ON/OFF key pad once. The Cooking Element Indicator Light will turn
OFF.
