Kenmore 253-35568, Owner'S Manual

Page: 9 / 15

8
Air Conditioner Features
(continued)
HEATING FEATURE
(on some models):
YOU WILL SEE
FAULT CODES:
Sleep
Check
Filter
T er
Mode
Cool
Power Saver
Fan Only
Auto Cool
Hi
Med
Lo
Temp/Timer
Temp/Timer
Remote
Sensing
DO THIS:
Sleep
Check
Filter
T er
Mode
Cool
Power Saver
Fan Only
Auto Cool
Hi
Med
Lo
Temp/Timer
Temp/Timer
Remote
Sensing
Sleep
Check
Filter
T er
Mode
Cool
Power Saver
Fan Only
Auto Cool
Hi
Med
Lo
Temp/Timer
Temp/Timer
Remote
Sensing
Sleep
Check
Filter
T er
Mode
Cool
Power Saver
Fan Only
Auto Cool
Hi
Med
Lo
Temp/Timer
Temp/Timer
Remote
Sensing
YOU WILL SEE TO TURN UNIT OFF
:
Sleep
Check
Filter
T
er
Mode
Cool
Power Saver
Fan Only
Auto Cool
Hi
Med
Lo
Temp/Timer
Temp/Timer
Remote
Sensing
Now that you have mastered the operating procedure, here are more features in your control that you should know.
PRESS
Note: This feature can be used with any combination of FAN Speeds , Timer, or Sleep Modes . When in the " Heat " Mode ,
the fan will run continuously while heat is needed. The temperature will automatically be maintained any where between
55
°
F (13
°
C) and 80
°
F (27
°
C). When the room set temperature is satisfied, the fan will cycle off and on to circulate and sample
the room air.
MODE BUTTON
SELECT HEAT
If the display reads " AS ", a sensor has
failed. Contact your Authorized
KENMORE Service Center
If the display reads " HS ", a sensor has
failed. Contact your Authorized
KENMORE Service Center
Sleep
Check
Filter
T er
Mode
Cool
Power Saver
Fan Only
Auto Cool
Hi
Med
Lo
Temp/Timer
Temp/Timer
Remote
Sensing
DO THIS:
PRESS ON/OFF
BUTTON
ADDITIONAL THINGS YOU SHOULD KNOW
The Remote Control will operate all the control panel features, follow the same instructions.
The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on
quickly. This prevents overheating of the compressor and possible circuit breaker tripping.
The fan will continue to run during this time.
The Control will maintain any set temperature between 60
°
F and 90
°
F degree (cooling), 55
°
F and 80
°
F (heating).
The Control is capable of displaying temperature in degrees Fahrenheit or degree Celsius. To convert from one to the other,
press and hold the Up and Down Temperature Selection Pads at the same time for 3 seconds.