4
TOOLS NEEDED FOR INSTALLATION
Screwdriver
(Flat &
Phillips)
Pencil
Tape
Measure
Drill
Sabre
Saw
Keyhole
Saw
-or-
Duct Tape
Wire
Stripper
PARTS NOT INCLUDED WITH HOOD*
CLEANING
Proper maintenance of the Range Hood will assure proper
performance of the unit.
MOTOR
The motor is permanently lubricated and never needs oiling. If
the motor bearings make excessive or unusual noise, replace
the motor with the exact service motor. The impeller should
also be replaced.
GREASE FILTER
The grease filter should be cleaned frequently. Use a warm
dishwashing detergent solution. Grease filter is dishwasher safe.
Clean all-metal filters in the dishwasher using a non-phosphate
detergent. Discoloration of the filter may occur if using phos
-
phate detergents, or as a result of local water conditions - but
this will not affect filter performance. This discoloration is not
covered by the warranty.
Remove grease filter by pushing in on the metal latch tab. This
will disengage the filter from the hood. Tilt the filter downward
and remove.
NON-DUCTED RECIRCULATION FILTER
The non-ducted recirculation filter should be changed every
6 months. Replace more often if your cooking style generates
extra grease, such as frying and wok cooking. Turn the filter
mounting tabs to remove filter and replace.
STAINLESS STEEL CLEANING
DO:
• Regularly wash with clean cloth or rag soaked with warm
water and mild soap or liquid dish detergent.
• Always clean in the direction of original polish lines.
• Always rinse well with clear water (2 or 3 times) after clean
-
ing. Wipe dry completely.
• You may also use a specialized household stainless steel
cleaner.
DON’T:
• Use any steel or stainless steel wool or any other scrapers
to remove stubborn dirt.
• Use any harsh or abrasive cleansers.
• Allow dirt to accumulate.
• Let plaster dust or any other construction residues reach the
hood. During construction/renovation, cover the range hood
to make sure no dust sticks to the stainless steel surface.
Avoid: When choosing a detergent
• Any cleaners that contain bleach will attack stainless steel
• Any products containing: chloride, fluoride, iodide, bromide
will deteriorate surfaces rapidly.
• Any combustible products used for cleaning such as ac
-
etone, alcohol, ether, benzol, etc., are highly explosive and
should never be used close to a range.
PARTS INCLUDED WITH HOOD
7 MOUNTING
SCREWS
(#8 X 1-1/2”
Flat Head)
7 DRYWALL
ANCHORS
8 MOUNTING SCREWS
(#8 x 3/8” Pan Head)
DECORATIVE FLUE
2 WASHERS
UPPER
FLUE MOUNTING
BRACKET
HOOD
MOUNTING
BRACKET
DAMPER / DUCT
CONNECTOR
4
MOUNTING
SCREWS
(M4 X 1-in.
Flat Head)
4 DECORATIVE
WASHERS
GLASS
CANOPY
HOOD
HOUSING
LOWER
FLUE MOUNTING
BRACKET
2 BULBS
B10, 120V
40W MAX.
4 RUBBER
BUSHINGS
NON-DUCT
PLENUM
2 TIE
WRAPS
FLEXIBLE DUCT
NON-DUCTED
RECIRCULATION
FILTER
NON-DUCT
PLENUM
COLLAR
8 MOUNTING
SCREWS
(#8 x 3/8” Pan Head)
NON-DUCT KIT - KENMORE PART NO. 59921
10-FT. CEILING FLUE
EXTENSION
KENMORE
PART NO. 59920
* Parts Not Included With Hood” are available by
calling 1-800-4-MY-HOME
®
Summary of Contents for 233.5992 Series
Page 24: ......
