20
Cut tie wraps holding regulator and side burner valve in place underneath grill head control panel. Be
careful not to cut igniter wires or the tie wraps holding the igniter wires in place.
With the aid of an assistant, lift and place grill head onto cart. Grill head sides go over attachment
tabs on cart. Make sure that side burner valve hangs outside the cart, and that regulator and igniter
wires hangs inside the cart. Attach head to cart with 4 screws as shown.
Loosen the four screws attached to the left panel of the burner box 3 to 4 turns as shown. Hang the
side shelf by the slotted holes in its side onto the four loosened screws. Carefully lift up the folding
shelf into it's locked position. Make sure the shelf is fully lowered onto the screws, or the shelf will
interfere with the lid opening. Tighten the bottom 2 previously loosened screws first, then tighten the
top previously loosed screws.
Buffet Table
Loosen
Burner Box
Cabinet
1/4-20 x 5/8
″
Screw
Qty. 4
Regulator
Side Burner Valve
Summary of Contents for 148.23682310
Page 64: ...64 美 ...