background image

WARNING

A strong gas smell, or the hissing sound of gas 
indicates a serious problem with your gas grill or 
the LP gas tank. Failure to immediately follow the 
steps listed below could result in a fire or 
explosion that could cause serious bodily injury, 
death, or property damage.
• Shut off gas supply to the gas grill.
• Turn the control knobs to OFF position.
• Put out any flame with a proper fire extinguisher.
• Open Grill Lid.
• Get away from the LP gas tank.
• Do not try to fix the problem yourself.
• If odor continues or you have a fire you can not 
extinguish, call your fire department. Do not call 
near the LP gas tank because your telephone is 
a form of electrical device and could create a 
spark resulting in fire and/or explosion.

CAUTION

: Spiders and small insects occasionally 

spin webs or make nests in the grill burner tubes 
during transit and warehousing. These webs can lead 
to gas flow obstruction which could result in a fire in 
and around burner tubes. This type of fire is known as 
“FLASH-BACK” and can cause serious damage to 
your grill and create an unsafe operating condition for 
the user.

Although an obstructed burner tube is not the only 
cause of “FLASH-BACK”, it is the most common 
cause.

To reduce the chance of “FLASH-BACK”, you must 
clean the burner tubes before assembling your grill, 
and at least once a month in late summer or early fall 
when spiders are most active. Also perform this 
burner tube cleaning procedure if your grill has not 
been used for an extended period of time.

See Cleaning Burner Tubes and Ports on page # 15

NOTE

: The normal flow of gas through the regulator 

and hose assembly can create a humming noise. A 
low volume of noise is perfectly normal and will not 
interfere with operation of the grill. If humming noise 
is loud and excessive you may need to purge air from 
the gas line or reset the regulator excess gas flow 
device. This purging procedure should be done every 
time a new LP gas tank is connected to your grill. For 
help with this procedure refer to page 14, Item 4 of “If 
Grill Still Fails To Light”, or call the Customer Service 
Helpline 8 AM to 5 PM PST at: 1-800-913-8999

Visually check the burner flames prior to each use. The 
flames should look like picture, if they do not, refer to the 
cleaning burner tubes and ports, see page 15 of this 
manual.

!

4

Repair Protection Agreements
Congratulations on making a smart purchase

. Your new 

Kenmore product is designed and manufactured for 
years of dependable operation. But like all products, it 
may require repair from time to time. That's when having 
a Repair Protection Agreement can save you money and 
aggravation.

Here’s what the Repair Protection Agreement * 
includes:

Once you purchase the Repair Protection Agreement, a 
simple phone call is all that it takes for you to schedule 
service. You can call anytime day or night, or schedule a 
service appointment online.
The Repair Protection Agreement is a risk-free purchase. 
If you cancel for any reason during the product warranty 
period, we will provide a full refund. Or, a prorated refund 
anytime after the product warranty period expires. 
Purchase your Repair Protection Agreement today!

Some limitations and exclusions apply. For prices 
and additional information in the U.S.A. call 1 -800-
827-6655.
*Coverage in Canada varies on some items. For Full 
details call Sears Canada at 1-800-361-6665
Sears Installation Service
For Sears professional installation

of home appliances, 

garage door openers, water heaters, and other major 
home items, in the U.S.A. or Canada call 

1-800-4-MY-

HOME.

9

Expert service

by our 10,000 professional repair 

specialists

9

Unlimited service and no charge

for parts and labor 

on all covered repairs

9

Product replacement

up to $1500 if your covered 

product can’t be fixed

9

Fast help by phone

- we call it Rapid Resolution -

phone support from a Sears representative. Think of 
us as a “talking owner’s manual”

CAUTION: Beware of Flash-Back

Burner Flame Check

Summary of Contents for 122.16435010




















Reviews: