Kenmore 122.16435010 Use & Care Manual Download Page 17

!

WARNING

Do not leave the grill unattended.

Your grill will get very hot. 

Never lean over 

the cooking area while using your grill. Do not 
touch cooking surfaces, grill housing. Grill Lid 
or any other grill parts while the grill is in 
operation, or until the grill has cooled down 
after use. Failure to comply with these 
instructions may result in serious bodily injury.

Burn-off

Before cooking on your gas grill for the first time, 
you will want to “burn off” the grill to eliminate any 
odor or foreign matter. Just ignite the 
burners,lower the Lid, and operate grill on the 
HIGH setting for 3 to 5 minutes.

Cooking Temperatures

High setting: 

Only use this setting  for fast 

warm-up,searing steaks or chops and for burning 
food residue off the grill after cooking is complete. 

Never 

use the HIGH setting for extended cooking.

Medium to Low Settings: 

Most recipes specify 

medium to low settings, including all smoking, 
rotisserie cooking and for cooking lean cuts such 
as fish.

NOTE: 

Temperature settings will vary with the 

temperature and the amount of wind outside your 
home.

Direct Cooking

The direct cooking method can be used with the 
supplied cooking grids and food placed directly 
over the lit grill Burners. 

Direct cooking requires 

the grill lid to be up.

The method is ideal for 

searing and whenever you want meat, poultry or 
fish to have and open-flame barbecued taste. 
Deep frying and smoking are also best cooked in 
this manner because they require direct heat.

Indirect Cooking

To cook

indirectly

, the food should be placed on 

the left or right side of your grill with the burner lit 
on the opposite side. I

ndirect cooking must be 

done with the Lid down.

Flare-ups

The fats and juices dripping from grilled food can 
cause flare-ups. Since flare-ups impart a 
favorably,distinctive taste and color to food cooked 
cover an open flame, they should be accepted up 
to a point. Nevertheless, uncontrolled flaring can 
result in a ruined meal.

WARNING

Do not line the bottom of the grill housing with 
aluminum foil, sand or any substance that will 
restrict the flow of grease into the grease tray.
Failure to comply with these instructions could 
result in a fire or explosion which could cause 
serious bodily injury, death, or property 
damage.

!

17

Cooking Instructions

CAUTION

To prevent damage to adjacent burner (s), the 
fire box heat shield must be securely inserted 
in place when operating the Searing burner.

!

Summary of Contents for 122.16435010




















Reviews: