background image

• Have your LP gas tank filled by a reputable propane 

gas dealer and visually inspected and re-qualified at 
each filling.

• Do not store a spare LP gas tank under or  
• near this appliance.
• Never fill the tank beyond 80 percent full . If this 

information is not followed exactly a fire causing 
death or serious injury may occur.

• Always keep LP gas tanks in an upright position.
• Do not store (or) or use gasoline or other flammable 

vapors and liquids in the vicinity of this gas grill.

• Do not subject the LP gas tank to excessive heat.
• Never store an LP gas tank indoors. If you store your 

gas grill in the garage or other indoor location, 

always

disconnect the LP gas tank first and store it 

safely outside.

• Place dust cap on tank valve outlet whenever the 

tank is not in use.  Only install the type of dust cap on 
the tank valve outlet that is provided with the tank 
valve.  Other types of caps or plugs may result in 
leakage of propane. 

• LP gas tanks must be stored outdoors in a well-

ventilated area and out of reach of children. 
Disconnected LP gas tanks must not be stored in a 
building, garage or any other enclosed area.

• When your gas grill is not in use the gas must be 

turned off at the LP gas tank.

• The regulator and hose assembly must be inspected 

before each use of the grill. If there is excessive 
abrasion or wear or if the hose is cut, it must be 
replaced prior to the grill being used again.

• Keep the gas regulator hose away from hot grill 

surfaces and dripping grease. Avoid unnecessary 
twisting of hose. Visually inspect the hose prior to 
each use for cuts, cracks, excessive wear or other 
damage. If the hose appears damaged do not use 
the gas grill. Call 1-800-4-MY-HOME for assistance.

Never

light your gas grill with the lid closed or before 

checking to ensure the burner tubes are fully seated 
over the gas valve orifices.

Never

allow children to operate your grill.

A tank of approximately 12 inches in diameter by 18-
1/2 inches high is the maximum size LP gas tank to 
use. 

You must use an OPD gas tank which offers 

an Overfill Prevention Device.

This safety feature prevents the tank from being 
overfilled which can cause malfunction of the LP gas 
tank, regulator and/or grill.

The LP gas tank must be constructed and marked in 
accordance with specifications of the U.S. Dept. of 
Transportation (DOT). In Canada, the LP gas tank 
must meet the National Standard of Canada ,Can 
CSA –B339 , Cylinders , spheres and Tubes for 
Transportation of Dangerous Goods and 
Commission .
1. The LP gas tank must have a shutoff valve, 
terminating in an LP gas supply tank valve outlet, 
that is compatible with a Type 1 tank connection 
device. The LP gas tank must also have a safety 
relief device that has a direct connection with the 
vapor space of the tank.
2. The tank supply system must be arranged for 
vapor withdraw.
3. The LP gas tank used must have a collar to 
protect the tank valve.

Proper Placement and Clearance of Grill 
Never

use your gas grill in a garage, porch, shed, 

breezeway or any other enclosed area. Your gas grill 
is to be used 

outdoors only, 

at least 24 inches from 

the back and side of any combustible surface. Your 
gas grill should not be used under overhead 
combustible construction . Do not obstruct the flow of 
ventilation air around the gas grill housing.
• Do not install this outdoor gas grill in or on 
recreational vehicles or boats
• Keep outdoor gas grill area clear and free from 
combustible materials, gasoline and other flammable 
vapors and liquids
• Do not obstruct the flow of combustion and 
ventilation air. Check for this each time prior to using 
grill.

Never

connect an unregulated LP gas tank to your 

gas grill. The gas regulator assembly supplied with 
your gas grill is adjusted to have an outlet pressure 
of 11” water column (W.C.) for connection to an LP 
gas tank.
• Only use the regulator and the hose assembly 
supplied with your gas grill. Replacement regulators 
and hose assemblies must be those specified in this 
manual.

PRECAUTIONS

3

Summary of Contents for 122.16118




















Reviews: