5.
Rotate cover
back. Press
cover firmly until
side latches
snap into place.
Make sure there is no gap between the
cover and base.
6.
Turn PowerMate upside down and
replace five (5) cover screws.
7.
Insert floor
brush into
PowerMate until
floor brush locks
into place.
2.
Place agitator
assembly back into
PowerMate .
TO REPLACE BELT
1.
Install new
belt over
motor drive,
then over
belt path.
NOTE:
See
PARTS AND FEATURES
for
Belt number.
4.
Line up front of cover and base. Rest
cover on front edge of base as shown.
Motor
Drive
Belt
Path
End Cap
Agitator
End Cap
End Cap
Belt Path
Brush Unit
TO CLEAN AGITATOR:
NOTE:
In order to keep cleaning efficiency
high and to prevent damage to your vacuum
cleaner, the agitator must be cleaned every
time the belt is changed.
The agitator must also be cleaned accord-
ing to the following schedule:
Vacuum Cleaner Use
Clean Agitator
HEAVY
- every
week
(used daily)
MODERATE
-
every month
(used 2-3 times/week)
LIGHT
-
every 2 months
(used 1 time/week)
IMPORTANT
Turn off and unplug vacuum cleaner from
electrical outlet.
Check and remove hair,
string and lint build-up frequently in the
PowerMate agitator and end cap areas.
Remove any dirt or debris in the belt path
area or in the brush roller area.
Carefully remove any string or debris
located on the agitator or end caps.
AGITATOR ASSEMBLY
20
Poignée de
transport
Indicateur de
CHECK BAG
Bouton de
rembobinage
de cordon
Couvercle du
rangement du
Pet PowerMate
Couvercle du
rangement
d’accessoires
Couvercle
du traîneau
Porte-sac
Dégagement
du couvercle
Cordon
électrique
Couvercle du
filtre
d’échappement
(Non illustré)
Filtre de sécurité
du moteur
(Derrière le sac
à poussière)
Sac à
poussière
TRAÎNEAU
Brosee à
contour
Pet PowerMate
Brosse à
dépoussiérer
Brosse
à tissu
Suceur
plat
Suceur
combiné
ACCESSOIRES
TUYAU SOUPLE
Détecteur de
poussière
Pivot de tuyau
Commande á
effleurement
électronique
Poignée
FRAN
Ç
AIS
5
Pièce N
o
.
Pièce N
o
.
Objet
Style Nº.
aux Etats-Unis
au Canadá
Sac à poussière
Q
20-50557
20-50410
Filtre d’échappement
EF-1
20-86889
20-40324
Filtre de sécurité
CF-1
20-86883
20-40321
du moteur
3.
Reinstall
agitator
cover and
replace two
(2) screws.
