Kenmore 111 Page 36 Use & Care Manual Download

Page: 36 / 46

CARE AND CLEANING

1. Water Dispenser

• Clean the water collecting tray with a sponge or

absorbent cloth.

2. Ice Storage Bin

• Removing: Pull out and remove the ice cube bin.

Make sure the refrigerator door is open completely

before pulling out the ice cube bin.

• Replacing: Push the ice cube bin all the way back

onto the supports until it locks into position. If the

bin cannot be pushed all the way back, rotate the

ice auger a quarter turn and insert again. Make

sure the refrigerator door is open completely before

replacing the ice cube bin.

3. Freezer & Refrigerator Bins

• Hold both ends and pull up.

4. Refrigerator Shelves

To remove a shelf

: Lift up

on front of shelf with one

hand and with other hand

push up on back of shelf

to release attachment

hooks from attachment

slots. Pull the shelf out.

To reinstall a shelf:

With

front of shelf angled

slightly up, engage hooks

on back of shelf into

attachment slots, and

then lower front of shelf

into place.

CAUTION

: Make sure that shelves are level from one

side to the other. Failure to do so may result in the shelf

falling or spilling food.

Slim Ice Maker

OPEN

ACCELA CHILL

ACCELA CHILL

HOLD 3 SEC

ACCELA CHILL

HOLD 3 SEC

FDR 30Cuft_UCG(영+스)(Kenmore)_F840-1.indd 36

2020-02-26 오전 11:53:59

Summary of Contents for 111















































Search results

Summary of Contents for 111

Reviews:

Related manuals for 111

Brands by name

Popular brands

Kenmore 111, Use & Care Manual

Search results

Summary of Contents for 111

Reviews:

Related manuals for 111

Brands by name

Popular brands