background image

 

Limited Warranty 

General:

 

Under certain circumstances we offer with our products the following One Year Warranty Against Defects in 
Material and Workmanship.  Please read your Warranty carefully. This Warranty sets forth our 
responsibilities in the unlikely event of defect and tells you how to obtain performance under this Warranty. 

ONE YEAR LIMITED WARRANTY 

AGAINST DEFECTS IN MATERIAL AND WORKMANSHIP 

KENDALL HOWARD PRODUCTS COVERED:

Performance Series LAN Benches and Workstations 

Terms of Warranty:

As provided herein, the Kendall Howard product is warranted to be free of defects in material and 
workmanship for a period of one year from the date of product purchase from Kendall Howard, not to exceed 
fifteen (15) months from the date of product manufacture. The date of purchase will be determined only from 
the Kendall Howard sales order acknowledgment. If any part or portion of the Kendall Howard product fails 
to conform to the Warranty within the Warranty period, Kendall Howard, at its option, will furnish new or 
factory remanufactured products for repair or replacement of that portion or part. 

Warranty Extends to First Purchaser for Use, Non-transferable:

This Warranty is extended to the first person, firm, association or corporation for whom the Kendall Howard 
product specified herein is originally sold for use in the United States (the "User"). This Warranty is not 
transferable or assignable without the prior written permission of Kendall Howard. 

Assignment of Warranties:

Kendall Howard assigns to User any warranties which are made by manufacturers and suppliers of 
components of the Kendall Howard product and which are assignable, but Kendall Howard makes NO 
REPRESENTATIONS as to the effectiveness or extent of such warranties, assumes NO RESPONSIBILITY 
for any matters which may be warranted by such manufacturers or suppliers and extends no coverage under 
this Warranty to such components. 

Drawings, Descriptions:

Kendall Howard warrants for the period and on the terms of the Warranty set forth herein that the Kendall 
Howard product will conform to the descriptions contained in Kendall Howard final invoices, orders, 
proposals (as modified) and other Kendall Howard descriptive documents ("Descriptions"). Kendall Howard 
does not control the use of any Kendall Howard product. Accordingly, it is understood that the Descriptions 
are NOT WARRANTIES OF PERFORMANCE and NOT WARRANTIES OF FITNESS FOR A PARTICULAR 
PURPOSE. 

Warranty Claims Procedure:

Within a reasonable time, but in no case to exceed ninety (90) days, after User's discovery of a defect, User 
shall contact Kendall Howard at 1-651-340-1400. Subject to the limitations specified herein, a Kendall 
Howard customer service representative will repair or replace the non-conforming Kendall Howard product 
warranted hereunder, without charge for materials. User will not be charged for labor if performed within 
ninety (90) days of product purchase. In all other instances, User will be charged for labor performed at 
Kendall Howard’s then current rates. Kendall Howard shall assume shipping costs for replacement products 
and return of the defective product to Kendall Howard. Warranty coverage will be extended only after 
Kendall Howard inspection discloses the claimed defect and shows no signs of treatment or use which 
would void the coverage of this Warranty. 

 

12

Summary of Contents for KH-5000-3-200-72















Reviews: