Page | 5
Save This Manual for Future Reference
Installation
Step 1:
Cut and remove the two plastic banding and any shrink wrap material, remove top from crate
packaging & remove components.
Step 2:
Place the Work Surface on its top on a clean and sturdy working area. Locate the two leg
assemblies and 16 Pan Head Screws. Install the screws 6 into the inside of each Leg Assembly
and 2 on the outer side.
Step 3:
Locate the Gussets. Place the bottom of the slotted end of the Gusset in to the slot guide of the
Leg Assembly, Locate 8 Pan Head Screws. Install Screws through the Gusset and into the Work
Surface
