6
6. INSTALLATION OF
SAFETY SUPPORT
An additional safety support is provided to prevent
the fan from falling. Secure the safety cable to the
ceiling joist with screw and washer, as illustrated in
Figure 11.
7. MAKE THE ELECTRIC
CONNECTIONS
Remember
to disconnect the power.
Follow the steps below to connect the fan to your
household wiring. Use the wire connecting nuts
supplied with your fan. Secure the connectors with
electrical tape. Make sure there are no loose
strands or connections.
Step 1 Connect the fan supply (black) wire and
light supply (blue) wire to the black household
supply wire as shown in Figure 12.
Step 2. Connect the neutral fan (white) wire to the
white neutral household wire.
Step 3 Connect the fan ground wire (green) to the
household ground wire.
Step 4 After connecting the wires, spread them
apart so that the green and white wires are on one
side of the outlet box and the black and the blue
wires are on the other side.
Step 5 Turn the connecting nuts upward and push
the wiring into the outlet box.
Figures 13 and 14 illustrate the wiring connections
for optional wall control (The wire color out of wall
control may vary, see wall control's installation
manual for correct wire connections.)
Hanger bracket
Safety cable
Figure 11
Figure 12
Figure 13
BLK
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
POWER LINES 120V
WH
BLUE
BLK
WH
FAN
LIGHT
BLK
BLUE
WH
WH
LIGHT
SWITCH
GREEN GROUND
WH
BLUE
BLK
WH
GRN
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
BLUE
BLK
WH
WH
FAN
LIGHT
POWER LINES 120V
BLK
GREEN GROUND
