background image

Wiring Your Ceiling Fan

Installing Blade Assembly

Installing The Switch Housing

1. If you are not sure that the electrical box

is grounded, contact a licensed electrician
for advice. It must be grounded for safe
operation.

2. Connect the black wire from the outlet

box to the black and blue wire from fan
with wire nut. Connect the white wire
from outlet box to the white wire from
fan with wire nut. Connect the green wire
from the outlet box to the green wire from
the fan (see Fig.5)

3. Loosen the two canopy mounting screws

from the hanger bracket. Mount the canopy
on the two screws in the hanger bracket
and twist the canopy, so the screw heads
hold the canopy in place. Retighten the
two screws (see Fig.6)

Install the screw, washer, blade and blade
bracket together & tighten them securely
(see Fig.7)

1.

Attached each blade assembly to the fan
body using the blade screws. Tighten them
securely (see Fig.8)

2.

Connect the plug from the fan and switch
housing (see Fig.9)

1.

FIG.6

FIG.7

FIG.8

FIG.9

FIG.5

HANGER
BRACKET

CANOPY

SCREW

BLADE
BRACKET

BLADE

SCREW

SCREW

PLUG

SWITCH
HOUSING

SCREW

SWITCH COVER

BLADE

WASHER

SCREW

WHITE

WHITE

BLACK

BLACK

BLUE

GROUND

GROUND

3

Caution : To avoid possible electrical
shock, be sure electricity is turned off at
the main fuse box before wiring.

Summary of Contents for AC-16652









Reviews: