KEMPTON COAT RACK WITH STORAGE ASSEMBLY INSTRUCTIONS
Batch No. 140317
Page
2
of
9
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean, wipe with a damp sponge and warm soapy water.
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
WARNINGS
This product is designed to hold 20Kg in total, spread evenly over the whole unit.
Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent them from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
This product is meant to be screwed directly to a wall. We have supplied fixings for the most
common types of walls but if your wall is of unusual construction, such as an internal or cavity
wall, please consult an expe
rienced trades person for advice on how to fix securely, so the
product is safe to use.
Keep small parts out o
f the
reach of children.
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to
construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
