EN
ø, mm
inlet tube wire liner
Fe, Mc, Fc
steel
0.8 – 1.2
W004083
W004214
10.5 m
W004216
15.5 m
W004217
20.5 m
W004218
25.5 m
1.4 – 2.0
W006617
4308620
15.5 m
4308630
25.5 m
Ss, Al (Fe, Mc, Fc)
plastic
0.8 – 1.6
W004185
W004145
10 m
W004219
15 m
W004220
20 m
W004221
25 m
3.2 mounting and locking of wire spool
Ensure quality filler wire is loaded to the wire feed cabinet. Check that the correct wire guide
tube and wire drive rolls are selected and fitted for the filler wire type used.
NOTE!
Check that the filler wire spool is correctly mounted and locked into position. Ensure the
spool is not damaged or deformed in such a way that it can rub or chaff against the internal
surface of the wire feed unit chassis or door. This may result in increased drag, impacting on weld
quality. This may also result in long term wire feed unit damage, rendering the unit unserviceable
or unsafe to use.
SuperSnake GT 02S, GT 02SW
8
Summary of Contents for SuperSnake GT02S
Page 2: ......
Page 3: ...Operating manual English ...