Kemper PROFILER Stage, Quick Start Manual

Page: 20 / 180

20 PROFILER STAGE QUICKSTART
Press the OUTPUT button on your PROFILER Stage.
Use the <PAGE> buttons to navigate to the “Kemper Kone” page,
then activate “Kemper Kone” with the corresponding soft button
above the display.
Initially, the Kabinet will be in full-range mode – if you prefer, you
can use Speaker Imprint mode by activating “Monitor Cab. Off”
and selecting one of the built-in speaker imprints.
More detailed information regarding the various options and
settings for the KEMPER Kone can be found in the
Main Manual .
If you are on stage, or in a studio, you won’t require a microphone
to pick up your sound, so you should connect the mixing desk to
the
MAIN OUTPUT XLR outs.
In such a scenario, you should unlink the Main Output Volume from
MASTER VOLUME , so that you are able to control your Monitor
Volume independently from the level sent to the mixing desk.
Bass Boost Monitor Stereo Monitor Cab Off Kemper Kone
0.0
Sweetening
-12.0dB
Monitor Volume
Celestion Vintage 30
Imprint Select
5.0
Directivity
OUTPUT Section [Page 8/8]
Kemper Kone
Bass Boost Monitor Stereo Monitor Cab Off
Kemper Kone
0.0
Sweetening
-12.0dB
Monitor Volume
Celestion Vintage 30
Imprint Select
5.0
Directivity
OUTPUT Section [Page 8/8]
Kemper Kone
Celestion Vintage 30
Headphone Link Monitor Out Link Direct Out Link Main Out Link
-12.0dB
Main Volume
-12.0dB
Monitor Volume
-12.0db
Direct Volume
-12.0db
Headphone Vol.
OUTPUT Section [Page 2/6]
Output Volumes