Kemper PROFILER Stage, Quick Start Manual

Page: 11 / 180

11 PROFILER STAGE QUICKSTART
NOISE GATE
In order to adjust the input Noise Gate intensity, press the INPUT
button and adjust the corresponding soft knob below the display.
Set the volume of your guitar all the way up and put your palm
on the strings so that they are muted. Next, increase the Noise
Gate intensity until the hum and noise produced by your guitar
disappears (usually happens in the range of 4 - 6).
For metal sounds, we recommend adding one of the special noise
gate stomps which are explained in the
Main Manual . There is also a
video tutorial dedicated to the noise gates available on:
www.kemper-amps.com/video
Intensity
~4-6
INPUT Section [Page 1/2]
5.0
Noise Gate
0.0dB
Clean Sense
0.0dB
Distortion Sense
Front Input
Input Source