Kemper MaxiFil 65 650, Operating Manual

Page: 58 / 450

EN
1502762-02 - 58 -
Item Description Note
1 Device button with power light Switches the product on
or off
2 Signal light Signals the operation of
the product
3 Built in regulator for run-on time in
start-stop operation
4 Maintenance socket For service personnel
only
5 Pressure measurement opening For service personnel
only
6 Signal horn
7 Connector socket for start-stop sensor
8 Pressure switch For service personnel
only
Tab. 13: Operating elements
• I/0 switch (item 1)
The product is switched on and off by pressing the switch.
The green signal lamp of the switch indicates trouble-free operation of
the product or the readiness for operation when using an optional
start/stop sensor.
• Signal lamp (item 2)
The yellow signal lamp indicates a fault or an error in the product. These
faults are displayed using different blink codes for optical reference.
• Signal lamp flashes evenly at regular intervals:
Product maintenance is due, inform service
• Signal lamp flashes briefly twice in a row at regular intervals:
The motor protection switch has triggered, inform service
• Signal lamp flashes briefly three times in a row at regular
intervals:
Incorrect rotating field, the fan is rotating in the wrong
direction. To remedy this, an electrician swaps two phases in
the CEE connector plug.