Kemper EVOLUTION LINE, Operating Manual

Page: 134 / 204

Operation
126
EVOLUTION LINE roll machine Emil Kemper GmbH
7.4.11 Setting the folding mats
Configuration of the line module Folding mats in the line is displayed in section
"5 Overview of the line".
7.4.11.1 Lifting folding mats out of the transport area
The function of the wire mesh belts can be deactivated by lifting them out of the transport
area. The folding flaps remain functional.
Take hold of the supporting shaft (1) for the
wire mesh belts with both hands at the ball
handles (2).
Place the supporting shaft for the wire mesh
belts (1) in the holder (3).
7.4.11.2 Setting the folding flaps
Use the star-shaped handle (1) to loosen the
clamp of the folding flaps.
Use the adjusting lever (3) to set the folding
flaps (2) to the desired position.
Retighten the star-shaped handle (1).