background image

WARRANTY

1.

Kemlan wood heaters carrya warranty on the 6mm firebox for a period of ten (10) years.

2.

This warranty also covers other components of the heater for a period of one (1) year. These
components include the baffle plate, handle assembly, secondary air tubes and fan.

3.

Kemlan’s warrantycovers the wood heaters against defects in materials and manufacture.

4.

THIS WARRANTY DOES NOT COVER

4.1 Failure to complywith

manufacturer’s operation instructions.

4.2 Normal wear and tear or damage caused byincorrect installation.

4.3 Any form of rust and/or corrosion to the painted finish of the heater.

4.4 Damage to the glass in the door, if the damage is caused byimpact or misuse.

4.5 The cost of collection and delivery of the wood heater and/or parts.

4.6 Damage caused bywater ingress.

4.7 Cost of removal of defective heater or re-installation of replacement heater.

4.8 Failure to use fireplace components supplied byKemlan Industries Pty Ltd.

4.9 Cost of inspection for damaged heater.

5.

CLAIMS

5.1 (I) Kemlan will provide a full replacement of the heater in the first five years after installation.

(ii) Replacement in the subsequent five years (i.e. sixth to tenth year after installation will be on the

following basis.

Owner will pay fifty percent of purchase price if the claim is made in the sixth year

– tenth year after

purchase.

5.2

Replacement of heater subject to all conditions in section four of warranty.

5.3

Should any defects occur, contact the Kemlan distributor from whom you purchased the heater.

5.4

Under this warranty the defective parts will be repaired or replaced by

Kemlan’s option, free of charge.

6.

The fireplace installation must comply with the relevant local statutes, ordinances, regulations and by-

laws.

PLEASE  COMPLETE  AND  RETAIN  THIS  SECTION  FOR YOUR 
RECORDS

Purchased from: .......................................................................................................
Address:  ....................................................................................................................
Date of Purchase:  ......................................................................................................

Summary of Contents for XL MK111












Reviews: