54
DE
KSB-300
CLEANING AND MAINTENACE
Half-fill the blender container with warm water and add three tablespoons of vinegar essence to
the container. For even better e
ff
ect, you can add a teaspoon of baking soda. Leave the mixture
to work for about 2-3 hours. Then rinse well with water.
You can fill the blender jug up to half with warm water and add baking powder. Let the baking
soda work for about an hour, then rinse well with clear water.
Alternatively, you can fill the blender jug up to half with warm water and add two to three tablets
of denture cleanser. Let the denture cleaner work for about an hour, then rinse well with clear
water.
For an environmentally friendly cleansing, use the juice of one lemon and two to three
tablespoons of baking soda or baking soda. Fill the container halfway with warm water and add
the ingredients. Let the blender run in PULSE mode for about 10 seconds. Then pour out the
container and clean the inside walls with a non-scratching soft sponge. Then rinse the container
thoroughly with water.
METHODS OF REMOVING MIXTURES IN MIX CONTAINER
Please do not clean the TRITAN® mixing bowls in the dishwasher as the knives can not be
removed from the blender jug and the cleaning salts and rinse aid can permanently damage the
TRITAN® bowls and blades.
The blade insert would su
ff
er in the dishwasher because the blades are very sensitive to the
acidic foods and the salt-containing dishwashing detergents. They would be attacked in the
long run.
In addition, flash rust, which can come loose from other metal parts in the dishwasher, can
deposit on the knives and damage them. Therefore, carefully clean the blades after use with
warm water and mild detergent.
The raw material TRITAN® is a modern, high quality and very durable material that can be
cleaned well even at high temperatures up to 100 ° C.
IS THE CONTAINER DISHWASHER SAFE?
A cleaning in the dishwasher can cause premature stress cracks. We therefore recommend
cleaning by hand and not in the dishwasher.
The dishwashing detergent and the brightener cause gradual degradation of the polymer, which
is associated with a reduction in mechanical strength.
The use of strong cleaning agents and, in particular, rinse aid can greatly reduce the number of
cleaning cycles since unsuitable cleaning agents can severely impair the plastic's mechanical
strength. Too high a level of detergent or too high a concentration of alkalis can also cause
cracks prematurely.
Always use a gentle cleaning agent and clean the containers by hand under running water with
a mild detergent. In general, the cleaning agents should be adapted to the TRITAN®, so that
there are no premature stress cracks. Rinse the containers greenish with clear water.
