28
Storage (Lay-Up)-One Month
CAUTION:
Make sure the water side of heat exchanger are drained when
ambient temperature is below 32 Degrees F.
Start the engine
Open throttle for a short burst of speed
Shut off fuel supply to the engine, run engine until completely out of gasoline.
Shutoff engine.
Leave spark plugs in holes or seal with suitable threaded plugs.
Cover all openings into the engine with dust proof cap or shields.
Check coolant protection fluid level).
Storage (Lay-Up) – For Indefinite Period
CAUTION:
Make sure the raw water side of heat exchanger are drained when
ambient temperature is below 32 Degrees F.
Drain crankcase completely.
Refill with recommended engine oil, (SAE 10) or equivalent.
Shut off fuel supply to the engine, run engine until completely out of gasoline.
Open throttle for a short burst of speed.
Shut off engine.
Check coolant protection.
Disconnect and remove battery.
Leave spark plugs in holes or seal with suitable threaded metal plugs.
Seal all openings in engine and accessories with Non-Hydroscopic Adhesive Tape.
The following inspections shall be performed on your engine at the indicated
intervals or more if needed. These inspections ensure that your engine will
continue to perform at a level it was designed to. Make sure that all inspections
are performed at their assigned intervals.
Summary of Contents for KODIAK MARINE
Page 2: ...2...
Page 13: ...13 Component Identification...
