Kelvinator Air Conditioning
unit part iden cation/air conditioning features 5
Air conditioning features
1 Front panel
2 Ai lter
3 Frame
4 Cabinet
5 Air inlet grille (outdoor side)
6 Air outlet grille
7 Operation knob
8 Power supply cord and plug
Accessories
Electrical work
Under normal circumstances there is no reason to modify the
electrical connection. In case it is required, a qual ed service
technician should perform this task.
1 Power cord conductors are distinguished according to
colour as follows (see Fig.1)
2 For your safety and protection, this unit is earthed
through the power cord (see Fig.2)
Please contact the Kelvinator Customer Care
department or a qual ed service agent or a similar
qual ed person if you want to replace it.
3 Be sure that the unit is correctly grounded. The wall
outlet (ensure that the circuit breaker for the power
outlet used for this product has suitable current rating)
should be provided with reliable earth wire.
power
cord
A
E
N
Fig. 1
Fig. 2
wall outlet
air break switch
E- earthwire, yellow/green
N- neutral wire, blue
A - active wire, brown
The operation panel of your unit will look like the following:
NOTE: The outline of the operation panel is based on
typical model, the function is the same with your
air conditioner while some difference may exist
in appearance.
Selector
The controls featured in this manual are representative
of many available models. Your model may offer slightly
different features.
Cool Mode
The desired cool setting is selected by rotating the knob to
the right to the appropriate location.
"HIGH"
– has maximum cooling effect and ai ow.
"LOW" –
has minimum cooling effect and ai ow.
"OFF" –
will completely shut off the unit.
"FAN" –
Permits HIGH/MED/LOW fan speed operation without
cooling (heating).
Note: When selecting a fan speed, the compressor will not run.
Unit parts ide
cation
1
2
drain pan (optional)
screw (for fastening
the front panel)